Description

COMSTOCK RECESSED PLAN B MICRO BRAKE

The Comstock Recessed Micro Brake is compatible with common .900″-24 adapters like the Comstock LPA, Q Plan-B, and Rearden Atlas.  The recessed micro brake greatly reduces recoil and blast baffle wear, and unlike most brakes out there, it does not need to be timed with shims.  It also has minimal protrusion into the suppressor to ensure proper fitment, even when used with recessed style adapters.

• Allows for the quick attachment and removal of suppressors
• Significantly reduces blast baffle wear; acts as a sacrificial baffle
• High strength 17-4 PH stainless steel
• Durable black nitride finish

1/2×28 (5.56 BORE)

• Standard 1/2-28 threads for use on all common barrels
• 13/16″ wrench flats for easy installation and removal
• Fits on barrels with a diameter up to 0.750″
• Effectively reduces recoil
• Rotationally symmetric and does not need to be timed with shims
• 1.25″ overall length; adds just 0.42″ to the muzzle
• 1.5 ounces
• This muzzle device may be used with bullets up to .223 or 5.56 mm.

1/2×28 (9mm BORE)

• Standard 1/2-28 threads for use on all common barrels
• 13/16″ wrench flats for easy installation and removal
• Fits on barrels with a diameter up to 0.750″
• Effectively reduces recoil
• Rotationally symmetric and does not need to be timed with shims
• 1.25″ overall length; adds just 0.42″ to the muzzle
• 1.4 ounces
• This muzzle device may be used with bullets up to .357 or 9mm.

5/8×24

• Standard 5/8-24 threads for use on all common barrels
• 13/16″ wrench flats for easy installation and removal
• Fits on barrels with a diameter up to 0.750″
• Effectively reduces recoil
• Rotationally symmetric and does not need to be timed with shims
• 1.25″ overall length; adds just 0.42″ to the muzzle
• 1.2 ounces

The 1/2-28 Recessed Micro Brake is compatible with the Sig Taper Cap for taper shoulder barrels.  It may not work with some taper shoulder adapters from other manufacturers with a larger outer diameter.  

Some suppressor companies do not warranty their products when used on aftermarket mounts or muzzle devices. Always check bullet stabilization before attaching a suppressor and always use an alignment rod to ensure the suppressor system is set up correctly.  Comstock Armory will not be held liable for injury, death, or damage resulting from the use or misuse of this product.

Read installation instructions before use.

Product fitment information